To Grenoble with the 1st Climate Experience!

As member of a delegation from Austria, Dr. Adriana Díaz of the ECODESIGN company GmbH participated in the 1^st Climate Experience of the Climate and Energy Funds to Grenoble. Grenoble is the European Green Capital of 2022!

System Efficiency Policy Paper at the 2022 ACEEE Summer study!

Our join paper with experts from the IEA-4E titled "System Efficiency Policy: the Next Level of Energy Savings" was succesfully presented at the 2022 ACEEE Summer study on Energy Efficiency in Buildings. 

What is the potential for energy savings from regulating systems?

As part of the IEA-4E systems project team, and together with policy experts we investigated broader policies focused on the energy efficiency of systems, to address a larger share of the energy consumption in an integral way and thus increase energy savings.

ECODESIGN company at the e-nova 2021 conference

In June 2022 the e-nova conference 2021, which was postponed due to the pandemic, was held at the FH Burgenland in Pinkafeld. Dr. Adriana Díaz from the ECODESIGN company was there with two paper submissions! 

IEA 4E publishes annual report 2021!

The International Energy Agency 4E Technology Collaboration Program aims to investigate topics related to the energy efficiency of electrical and electronic devices, in order to contribute to a sustainable energy system. 

European Commission publishes a proposal for a New Ecodesign for Sustainable Products Regulation

In March 2022, the European Commission published a proposal for a new Ecodesign for Sustainable Products Regulation (ESPR), which shall cover all products introduced to the EU market, including their components and intermediate products. The ESPRs objective: "Making sustainable products the norm in Europe".

Life Cycle Thinking and Wide Band Gap power electronics

Together with experts from the TU Vienna and the Austrian Institute of Technology we released a  paper for the International e.nova 2021 Conference titled: A "life cycle thinking” approach to assess differences in the energy use of SiC vs. Si power semiconductors.

Ready to roll - Frauscher´s LCA and EPDs are ready!

The ECODESIGN company assessed by means of a Life Cycle Assessment (LCA), the environmental performance of a wheel detection system of the Austrian company Frauscher Sensortechnik GmbH. This complete wheel detection system safely monitors track sections and enables the secure operations of railways worldwide.

Stop the Vespa velutina!

In a new ERASMUS+ project, we are working with international partners to develop a knowledge campaign to stop the spread of the invasive hornet species Vespa velutina in Europe. The project started on 1.11.2021 and will run until 2023.

CO2Fokus & Life Cycle Thinking - Newsletter out now!

The CO2Fokus consortium has published a newsletter describing current activities, and detailing our work on this international H2020 project - the assessment of the environmental, social and economic impacts of the technology to be developed.

System efficiency policy paper at the 2021 eceee summer study!

Our joint paper titled "Transforming product efficiency policy into system efficiency policy" was presented online at the 2021 eceee summer study!

PECTA Experts Workshop on Wide Band Gap Semiconductor Technologies

On April 07, 2021 the third expert workshop of PECTA took place virtually. PECTA aims at exploring emerging and energy efficient Wide Band Gap (WBG) semiconductor technologies. More than 30 experts participated in the online workshop to discuss current PECTA tasks and results.

ECODESIGN company leads the PECTA Task B - Energy and environmental related Life Cycle Assessment (LCA), and participated in the workshop!

The Total Energy Model of connected devices is updated and interactive!

Network connected devices can significantly reduce the energy consumption through control and optimization of systems that deliver energy services. Still, managing and communicating data over a network requires additional energy. The Total Energy model - TEM of the 4E Electronic Devices and Networks Annex - EDNA provides a quantitative model of the total additional global energy consumption of network connected devices globally and regionally.

The ECODESIGN company is leading the "Total Energy Model (TEM)" work in EDNA, for which a new interactive version is now accessible online!

Successful 3rd event on Circular Public Procurement

The ECODESIGN company, together with Spanish partner Teknimap and the Provincial Council of Gipuzkoa, succesfully held an online event on 19.02.2021 on Circular Public Procurement with international experts from the construction sector, and in the framework of the project "Gipuzkoa 2050: Territorio 100% Circular"...

ECODESIGN presented twice at the 2020 e-nova Conference

The annually held “e-nova” international conference, organized by the University of Applied Sciences Burgenland took place online last November 26 and 27, 2020.

ECODESIGN participated with two presentations!

Our Blesabee project won the 2020 EU VET Excellence Award!

Our project Blesabee: "Innovative Blended Learning Toolkit for the Safe Pest Management of Honeybees" did win the award to Best distance learning project at the 2020 European Erasmus+VET Excellence Awards!

Our Blesabee project is nominated to the 2020 EU VET Excellence Award!

Our project Blesabee: "Innovative Blended Learning Toolkit for the Safe Pest Management of Honeybees" is nominated to the "2020 European Funding for Excellence Awards – Erasmus+: VET Excellence Awards"; in the category Distance learning. The next step is the online public voting from the 10^th of October to the 10^th November 2020. You can also support our project with your vote!

GHG Inventory of Bonaventura Strassenerrichtungs-GmbH

In July 2020 the ECODESIGN company GmbH completed the Greenhouse gas (GHG) inventory for the company Bonaventura Strassenerrichtungs-GmbH.

Engineering Thinking!

This April 2020 article from our managing director, published in the ReadIng magazine issue 88, is discussing the importance of engineering approaches in product development and design, for reducing greenhouse gas emissions, and for creating future-oriented products.

Update on COVID-19

At these times of special concern the ECODESIGN company GmbH is applying all the safety and hygiene measures recommended by the Austrian Government regarding COVID-19, to protect the health of our workers, clients and suppliers.

We understand that caring for our projects and for the bees cannot be stopped, even more so in this exceptional situation....

Future of European Beekeeping Conference 2020

The international Conference "Future of Beekeeping" dealing with European honeybees and Asian predators Vespa velutina and Varroa destructor was held in Bratislava last March 07, 2020. The ECODESIGN company GmbH was there!

Green Public Procurement (GPP) in the EU

Together with our Spanish cooperation partner Teknimap Energía y Medio Ambiente S.L., the ECODESIGN company GmbH conducted a study on Green Public Procurement (GPP) in the European Union, commissioned by the regional government of the Basque province of Gipuzkoa (Spain) - the Diputación Foral de Gipuzkoa (DFG).

ECODESIGN presented again at the e-nova 2019 conference

The annually held “e-nova” conference took place at the University of Applied Sciences Burgenland in Pinkafeld (Austria) last November 2019. This year the topic was “Sustainable Technologies - Energy, Buildings, and Environment”.

ECODESIGN was there!

Apimondia 2019: gold medal for our ERASMUS+ project BLESABEE!

Together with our network partners from the ERASMUS+ project BLESABEE we presented the publication BLESABEE – From Healthy Bees to Healthy Humans at Apimondia 2019, the largest international apiculture exhibition (in Montréal, Canada) and won the gold medal!

Our new project “Smart Zero Waste Dispenser” started!

Packaging-free shops offer an alternative for conscious customers who want to reduce the use of packaging when purchasing groceries. The ECODESIGN company GmbH, together with partners from academia and business will develop a new, innovative packaging-free concept for small groceries, bulk sellers, as well as for large supermarkets. 

ECODESIGN is partner in the Horizon2020 project CO2Fokus

The EU Horizon2020 project CO₂Fokus has started and aims to develop a cutting-edge technology able to convert industrial CO₂ into dimethyl ether (DME), a compound largely employed in the chemical industry which can also be used as fuel.

ECODESIGN presented at the e-nova 2018 conference

In November 2018 the annually held “e-nova” conference took place at the University of Applied Sciences Burgenland in Pinkafeld (Austria). This year the topic was “Building of the future? interconnected – digital – eco-social”. ECODESIGN was there!

Ecodesign Best Practice

In the latest Senate of Economy Austria Magazine Dr. Wolfgang Wimmer presents the "Ecodesign Best Practice", with the example of the Filcoten^® drainage channels, from the Austrian pioneer company BG-Graspointner.

Chances through the Circular Economy

This was the keynote presentation of Dr. Wolfgang Wimmer at the Climate Alliance event of the Austrian Senate of the Economy, last 8^th of May 2018 in Klagenfurt.

Final Conference of ERASMUS+ project EDES

The ECODESIGN company will present its work at the final conference of the ERASMUS+ project EDES "Enhancing Dual Education System in Small and Medium enterprises", which will be held in Bratislava, Slovakia next 07.02.2018.

Efficient Electric Vehicle Supply Equipment - EVSE Workshop on 28.09.2017

The energy performance of the EVSE was the topic discussed in this one day workshop with national and international experts.

The workshop was jointly organized by the Austrian Ministry of Transport Innovation and Technology and the ECODESIGN company GmbH.

ECODESIGN company and TEKNIMAP agree cooperation in Spain

In March 2017 ECODESIGN company GmbH and the Spanish firm TEKNIMAP Energía y Medio Ambiente S.L. signed a one year cooperation agreement to jointly offer services to the Spanish market.

ECODESIGN+ educational licenses now available!

ECODESIGN⁺ is an ideal practical teaching tool for environmental assessment. It allows students to calculate the carbon footprint of products, covers the full product life cycle perspective, allows for comparison between product models and produces a standardized comprehensive one page summary of the modelled product. It is intuitive, easy to use and offers the teacher full control over student user accounts and their product models.

ECODESIGN company at the enova2016

On 25th november the ECODESIGN company presented the austrian case study on the Energy Efficiency of Residential Energy Monitoring Systems at the enova2016. Under the title 'Sustainable Technologies - Buildings, Energa, Environment' the congress attracted an international audience from research and industry.

Launch of the new improved ECODESIGN+

With our Product Carbon Footprint (PCF) Software ECODESIGN⁺, users without prior knowledge can calculate a Product Carbon Footprint, identify the impact of improvement measures along the life cycle of the product and generate a concise and clear report for communication.

Take a look for yourself and...
test ECODESIGN⁺ for free now!

The ECODESIGN company develops an Environmental Factsheet for METEKA

Our productive cooperation with market pioneer METEKA generated a Life Cycle Assessment the corresponding Environmental Product Declaration (EPD), and an Environmental Factsheet of the MEDISTER® products. The Factsheet communicates clearly, concisely and in a transparent way the key product facts and benefits of METEKA´s products.

The ECODESING company supports the WWF Climate Campaign

We joined WWF and numerous progressive organizations in requesting government decision makers to commit to binding climate targets during the COP21 in Paris.

Searching For Efficiency through Energy Monitoring – Promises and Opportunities

This is the title of a workshop held on the8^th of March 2016 at the Intercity Hotel in Vienna, gathering different stakeholders to discuss promises of energy savings and possible trade-offs, market opportunities and existing as well as future policy for residential energy monitoring and management systems.